This Easy Street EFI System Kit (Gold, 600 HP) has self-learning, an integrated ECU, (1) fan control, a handheld touch screen tuner, 250-600 HP, and (4) 80 lb injectors.
The Easy Street EFI System Kit is a FiTech Fuel Injection System rounding out the Street Series line. The Street Series includes the 150??400 HP Go Street, the 200??800 HP Meanstreet, and now the 250??600 HP Easy Street specifically designed for naturally-aspirated engines. With a classic gold finish, the Go Street Series EFI System may have the looks of a factory carburetor, but the similarities end there. The pre-programmed assembly bolts right into place on the squarebore intake manifold and requires only a minimum of inputs to fire up. The Easy Street accepts the tach signal from the coil negative, an HEI distributor, or from a CD ignition box for a simple installation. A fast-reacting wideband O2 sensor is supplied in order to monitor the fuel burn, which signals the self-learning technology of the ECU about adjustments to the mixture. This results in smooth performance anywhere from idle to high rpm's.
The Easy Street EFI System Kit is a FiTech Fuel Injection System rounding out the Street Series line. The Street Series includes the 150??400 HP Go Street, the 200??800 HP Meanstreet, and now the 250??600 HP Easy Street specifically designed for naturally-aspirated engines. With a classic gold finish, the Go Street Series EFI System may have the looks of a factory carburetor, but the similarities end there. The pre-programmed assembly bolts right into place on the squarebore intake manifold and requires only a minimum of inputs to fire up. The Easy Street accepts the tach signal from the coil negative, an HEI distributor, or from a CD ignition box for a simple installation. A fast-reacting wideband O2 sensor is supplied in order to monitor the fuel burn, which signals the self-learning technology of the ECU about adjustments to the mixture. This results in smooth performance anywhere from idle to high rpm's.
Information:
The Easy Street EFI System Kit (Gold, 600 HP) features the following: Classic Carburetor Gold Finish; Annular discharge; Windshield Mount for control; (4) 80lb flow matched injectors; Extreme self learning for wide range of super-fast dial in connection; Suitability for crate engines and performance engines; Pre-programming with bolt-n-go technology for out of the box performance with minimal input required; Easy tach input (reads tach signal from COIL, HEI, CDI, and many other ignition brands [NO TIMING CONTROL]); design for non-boosted natural aspirated engine applications ONLY; Wide band O2 sensor with mounting kit; On-board fuel pump diver with PWM; Hand-held tuning module for performance tuning; E-85 gasoline compatibility; Voltage Control fuel pump control(reduces the voltage to the pump under low load conditions thus reducing noise and heat which will extend the life of the pump and keep the fuel in the tank cooler); Wet flow technology; Unique Swirl Spray Annular discharge design that assures COMPLETE ATOMIZATION; and Air Fuel ratios can be optimized on the fly while driving. This kit includes the following: a classic gold die-cast throttle body, a windshield mount, FiTech 80-lb flow-matched injectors, a wide-band O2 sensor, -06AN fuel inlet fittings, and a fan control (adjustable from controller).| Attributes | |
| California Proposition 65 | Yes |
| Country of Origin (Primary) | CN |
| Emission Code | Not in CA |
| EPA Classification | 3 |
| Hazardous Material Code | N |
| Life Cycle Status Code | Available to Order |
| Maximum Horsepower with Gas | 600 hp |
| NAFTA Preference Criterion Code | B |
| SDR Required Flag | N |
| Warranty Time | 12 |
| GTIN | 00856291005831 |